|
Quantity
|
Price
|
||
|
|
|||
|
|
|||
The digital heater (voskoplav) is designed for heating wax in granules, tablets, as well as in jars of 500 grams of a standard size. It has an additional silicone container for hot wax in tablets or granules or for paraffin. A handy and versatile wax melter with temperature control, suitable for professional and home use. It has a compact size, good design, equipped with a temperature controller and an indication of heating indicators, with which the process becomes even easier.
The 360-degree temperature adjustment switch allows you to easily and accurately control the temperature. Each click of the control knob changes the temperature by 1 degree, while a quick turn of the knob allows you to directly set the desired temperature (temperature range 35-125 degrees Celsius). The electronic display on the temperature control switch shows the heating temperature and allows you to control it during the entire time of use.
Thanks to the LED-backlight, you can easily determine the degree of heating of the wax. A red light means the wax is still heating up, while a green light means it's hot and ready to go. Voskoplav has a silicone bowl that is easy to use and easy to clean.
Size 190 * 178 mm
Voltage
EU plug 220 V (50/60 Hz)
Elasticity 100 W
Capacity
500 ml
Temperature range
35-125℃
Certificate
CE- (EMC, LVD), FCC
Warning
When using electrical appliances, especially when children are present, basic safety precautions should always be observed. Read all instructions before using wax.
Voskoplav should be on a flat surface and not on the edge of the table. Do not rearrange the included voskoplav in the course of an epilation.
DO NOT turn on the device if the wax tank is empty.
To avoid burns, test the heated material on the back of your hand or on another small area of skin. After that, reduce or increase the temperature to a more suitable value.
DO NOT place the waxer in water or any liquid, keep the working area dry. The use of water in the process of cleaning the tank is prohibited.
If the waxer falls into water, unplug it immediately. DO NOT touch the instrument with your hands.
Keep away from children.
Use of a wax melter
Place the wax on a flat surface, next to which the epilation procedure will be performed.
Place the silicone bowl inside the wax maker, then add the wax/sugar paste to it.
Connect the wax melter to the mains, the screen will display OFF. Turn the temperature control clockwise to turn on.
The return switch can be rotated 360° to adjust the temperature. The return switch is sensitive. The temperature can be adjusted by one turn of the gear, one turn is 1℃. Quickly turn the switch to quickly set your desired temperature (Temperature range is 35-125℃.)
Wait until the mass is evenly melted (about 15-20 minutes). Cover the wax with a lid to speed up the process.
After reaching the set temperature, the mode of maintaining the optimal temperature will turn on. Set a different temperature if necessary.
Start the epilation process.
After completing the procedure, turn the temperature control knob counterclockwise, when the temperature is adjusted to the lowest (35 ℃), turn one or more turns counterclockwise to turn off the device.
Disconnect the device from the network.
How to clean wax
Use a spatula to remove any remaining wax.
Slightly heat until the wax residue is dissolved, turn off the waxer.
Use a paper towel to wipe the inside of the wax pan to remove any wax residue.
Epilation caution
Contraindications to the wax/sugar paste epilation procedure: fresh tan, wounds, abrasions, moles, papillomas, various skin diseases and other medical contraindications, allergies to the material used. If in doubt, it is best to consult your doctor.
After the procedure, do not visit the solarium, swimming pool, gym and other types of training for 24 hours, do not use soap and cream in the area of the treated areas.
To avoid ingrown hairs and other undesirable effects, moisturize your skin daily.
Scrub the treated area 2 times a week, and also 24 hours before epilation.
On the day of epilation, it is advisable not to use cream and deodorant in the areas of future treatment.